Bushnell TrailScout 119835 Owner's Manual page 24

SUPPLEMENTAL OPERATING NOTES
• The LCD showing "ENtER SUSPEND" means the system is going
to suspend activity (sleep mode to conserve battery power).
• After setting K1 to ON, the system will begin working after a
two minute delay. if there is no activity sensed in three minutes,
the system will go to SUSPEND. When the PiR senses activity, the
camera will be activated immediately.
• The LCD showing "RESUME" means the system is active.
• Changing batteries within 20 seconds will avoid the need to reset
the date and time.
Trail Scout 2008 Models 119835+124 24 3/4/08 12:05:30 AM