Table of Contents
Advertisement
Installation & operation guide
1 Symbols used in this document
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in moderate injury, damage the product, or
lead to loss of data.
Indicates a hazardous situation which, if not avoided, may seriously impact operations.
1.1 Warnings in this document
Battery safety:
Fire, explosion and severe burn hazard.
Please follow these guidelines in order to avoid injury to yourself and others:
•
If not disposed of properly, the battery may cause fire or chemical burn
•
Do NOT recharge, disassemble, crush, expose to water, heat above 212 °Fahrenheit (100 °Celsius), or
incinerate the battery
•
Keep away from children
Must be installed to provide a separation distance of at least 20 cm from all persons.
The contents of this guide and the quick guide included with the device must be followed at all times when
installing, configuring or handling the device in general. If this guide is not followed, Kamstrup cannot be held
accountable for any malfunctions or misuse of the product.
Do not install outside Lightning Protection Zone 0C. 10 ft/3 m height and depth around the building.
Use only approved accessories with this device. Unapproved modifications or operation beyond or in conflict with
these instructions for use may void authorization by the authorities to operate the device.
Ensure that READy MTU is in transport mode when transported by air freight or during decommissioning.
Ensure proper disposal of the product.
Do not disassemble the product as the IP68 sealing will be void, and do not tamper with the internal battery and
electronics.
READy MTU is designed to operate at temperatures of -30 °C...65 °C (-22 °F...149 °F). Using the device outside the
intended operating temperature range may cause deterioration of battery life or in worst case operating failure.
Must NOT be co-located in conjunction with any other antenna or transmitter.
Do not try to modify or repair the device. Attempts to modify or repair will void the warranty.
Ensure that READy App and READy Manager are synchronized before you proceed with the installation.
4
Kamstrup A/S • 55122662_C1_US_06.2020
READy MTU
Advertisement
Table of Contents
