Table of Contents
Advertisement
Installation & operation guide
8.1.5 Wall interior
Mount READy MTU as high as possible near an exterior wall. The MTU should be mounted at or above grade
(ground level).
Mount READy MTU at least 6 inches away from pipes and conduit and several inches below the ceiling.
Mount READy MTU at least 5 feet away from any large metal objects. (e.g. refrigerators, HVAC ducts, furnaces,
and hot water heaters).
Do not mount READy MTU in a basement with a metal ceiling.
Do not mount READy MTU directly under AC power wires, circuit breaker panels, or telecommunications wires.
Use the wall bracket to install READy MTU in interior environments.
8.2 Configuration of READy MTU
Required:
• Android device
• READy App (synchronized with READy Manager)
• READy Converter
• Magnet
8.3 Default or preconfigured
If your READy MTU has been ordered preconfigured, please follow section 8.3.1 Configuration of preconfigured MTU.
If your READy MTU has been ordered default configured, please follow section 8.3.2 Configuration of default configured MTU.
If in doubt, follow 8.3.2 Configuration of default configured MTU.
8.3.1 Configuration of preconfigured MTU
A preconfigured MTU requires that the device serial number imported in READy Manager equals the device ID
read on the encoded output.
Complete all cable connections before activating the device using the magnet sensor.
If the device serial number imported in READy Manager does not equal the ID read by the MTU on the encoded output, please
follow the installation and configuration instructions for default configured MTU in section 8.3.2 Configuration of default
configured MTU.
14
Kamstrup A/S • 55122662_C1_US_06.2020
READy MTU
Advertisement
Table of Contents
