Mechanical Reassembly Procedure
1. Assemble Bottom Cover
No
Procedure
1
Screw 9 hex spacers to the
Bottom Cover.
2
(1) Screw 4 screws to
assemble the Elevator (Left).
(2) Screw 4 screws to
assemble the Elevator (Right).
(3) Assemble the Front IR
Receiver with the Mylar
directly.
(4) Screw 3 screws to
assemble the Fan 1.
(5) Screw 2 screws to
assemble the Fan 2.
(6) Screw 2 screws to
assemble the Interlock Switch.
31
Elevator (Left)
Front IR Receiver
Fan 2
Photo
Elevator (Right)
Fan 1
Interlock Switch
Chapter 3