Setup Procedure (Vga In 1 & Vga In 2) - Acer P5271 Service Manual

6-3 Setup Procedure
(VGA IN 1 & VGA IN 2)
1. Connect all ports
(1) Connect P1 of fixture with COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P2 of fixture with VGA IN 1 /
VGA IN 2 Port of projector by VGA Cable.
(3) Plug Power Adapter to JP2 of fixture.
(4) Plug Power Cord to projector.
Note: - You must confirm that the JP3 is closed in
all procedure.
- The EDID Upgrade procedure of VGA IN 2
port is the same as VGA IN 1 port, we take
VGA IN 1 port as an example here.
P5290/P5271/P5390W/P5271i Confidential
RS232 Cable
P1
JP3
P2
VGA Cable
Power Port
Power Port
Adapter
JP2
VGA IN 1 Port
VGA IN 2 Port
6-3