Operation; Selecting Channels; Volume Control - Strong SRT7807 User Manual

RCL key: to back to previous program.
n
TEXT key: to access teletext (if available).
n
EPG key: to access the EPG (more information on chapter 7.7).
n
MUTE key: to disable the audio.
n
TV/R key: to switch between video and radio channels.
n

6.0 OPERATION

In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 8 to get familiar with the menu of your new tivùsat
receiver.

6.1 Selecting channels

There are different ways to change channels with your receiver.
Via direct access
n
Via the channel list
n
Via the CH+/- buttons
n
6.1.1 Direct access
To gain direct access to a certain channel simply enter its number with the 0~9 keys on the remote
control. Channel numbers can be up to 4 digits long. Entering numbers and values with less than 4 digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press OK button in viewing mode to display the channel list.
Use pq to highlight your channel of choice and press OK to select the highlighted channel for preview.
Use the FAV button to get access to a group of favourite lists. Press OK to select only channels from a
particular list. Refer to chapter 8.2.2 TV Channel Manager to organize channels into favourite lists.
The channel list is also equipped with three additional functions accessible by pressing the colored
function keys. Their functions are described below:
FAV List:
Edit:
Satellite:
NOTE:

6.2 Volume Control

The volume control allows you to adjust the audio volume. Press VOL+/- or t u button to adjust the
audio volume. Press the ! button to temporarily mute audio. To restore the sound press the ! button
again or select VOL+/-
NOTE:
Green button – To select one of the 8 Favourite lists (to set these favourite
channels see chapter X).
Yellow button – To lock the displayed channel or to add it to one of the
favourite lists.
Blue button – To select a source other than Hotbird (only if more than one
satellite has been scanned).
In green, on the top row of the channel list, is provided the technical
information of the selected channel (frequency, symbol rate, polarization
and satellite).
The ! function remains set while you switch channels.
9