Language, Audio And Video; Pin Code Creation; Satellite System; Search Channel - Strong SRT7807 User Manual

4.1 Language, audio and video

The receiver turns on displaying the Welcome message, press OK to go to the next step. In this page it
is possible to set Language, Resolution, Aspect Ratio and Audio Format. Press OK to select the option you
need to change then pq to change selection. To confirm and exit press OK.
Select NEXT and confirm with OK to continue the installation.

4.2 PIN code creation

Create and confirm the PIN code, then select NEXT to continue.

4.3 Satellite System

In this page it is possible to set the LNB, Antenna type and LNB Power. The default settings are for a system
with universal LNB, in case you want to change the default settings please check the 8.1.1 Antenna
Setting chapter.
To go to the next step select NEXT and confirm with OK to continue the installation.

4.4 Search Channel

On Transponder select All (default setting) to search on all available frequencies or select a single TP for
a targeted search. On Type of search please set the search type choosing between Tivùsat+FTA, to store
the FTA (free to air) and Tivùsat channels, All to store all the channels and FTA Only to store only the FTA
programmes.
To start the channel search, select NEXT and confirm with OK.
NOTE:

4.5 End of installation

At the end of the installation wizard, the last two steps concern the information regarding smartcard
activation and the instructions for downloading the Tivùsat program guide.
To go to the next step confirm with OK.

5.0 QUICK GUIDE FOR USING YOUR RECEIVER

We at STRONG understand that you can't wait to enjoy your new tivùsat receiver.
However, we advise you to read this manual to get the best performance from your STRONG tivùsat
receiver. To turn your receiver ON or to go to Standby mode, press q on the remote control. Choose
channels with CH+/-. Alternatively, you can also enter the channel number with the 0~9 buttons on the
remote control or press OK in viewing mode to display the channel list. The volume can be adjusted with
VOL+/- or with t u.
The keys with relative functions available in viewing mode, are listed here below:
INFO key: show infobar
n
FAV key: show favorite group (to create new favorite channel lists see chapter 8.2.2).
n
OK key: show current channels list.
n
SUB key: show subtitle list.
n
AUDIO key: show audio list.
n
RED key: show Video Output.
n
MEDIA key: for direct acces to media menu.
n
8
If you see the messages No list found or {No channels found, please check
the antenna connections and signal levels of the satellite dish.