Main Control Board; Outer Door - Indesit Hotpoint HCD662UK Service Information

Main control board

The main control board controls all electrical elements in the dishwasher
machine. It located in the protecting box in the bottom of dishwasher
machine. And it easy is replaced when it cannot work.
Removal and Replacement
1. Disconnect power supply.
2. Take off cutlery basket, basket and filter system.
3. Turn the dishwasher machine. And remove all screw for fixing cover of protecting box.
Screw
Part Name: 1 – cover of protecting box
4. Pull out all housings and terminals (including some locking terminals), then remove all
screws for fixing main control board.
Part name: 1 – protecting box 2 – main control board
Note
: mark all housings and terminals' positions and colors before pulling out them.
Note
: some terminals are locking terminals.
5. Reverse the above procedure to install. And check out all connectors connects well.

Outer Door

The outer door covers the door to the dishwasher and protects the detergent dispenser.
Removal and Installation
1. Open the door of dishwasher. And remove all screws for fixing outer door assembly.
Screws
1
1
Screws
2
6