2.After removing the packing, check to make sure that the appliance is not damaged. If in doubt, contact a qualified professional. 3.The dishwasher must only be used by adults for the washing of household dishes and cooking utensils. 4.Fundamental rules to follow when using the appliance: - Never touch the dishwasher when barefoot or with wet hands or feet;...
Close-up View (Interior) Upper Rack Top Sprayer Arm Rack Height Adjustor Lower Rack Technical characteristics Width Depth Height Capacity Mains water pressure Power voltage Total absorber power Fuse Bottom Sprayer Arm Salt Container Cap Washing Filter Detergent and Rinse Aid Dispenser 12 standard place settings 20 KPa÷...
Page 7
Salt ... Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
After pouring in the detergent, replace the lid, pressing down until it clicks. Dishwasher detergent in tablets is now available on the market, in which case you should place one tablet into container "D" and replace the lid.
Loading the Dishwasher Before placing the dishes in the dishwasher, remove the larger food particles to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed.
(see the section entitled, "Starting a wash cycle..."). Then, turn the dishwasher back on using the ON-OFF button. If you forget to load some of the dishes... The wash cycle can be interrupted by pressing the ON-OFF button.
Wash Cycle Table Cycle Selection Information Very dirty dishes, pots and pans (not to be used 1) Heavy Duty with delicate items). Normally dirty dishes, pots and 2) Normal Wash pans. Standard (IEC-EN 50242) daily cycle. Economic, fast cycle to be used to on not very dirty dishes right 3) Rapid Wash...
Energy Saving Tips - It is important to try and run the dishwasher when it is fully loaded in order to save on energy. In order to prevent odors from forming and food from caking onto the dishes, you can run the hold cycle.
Troubleshooting It may occur that the dishwasher does not function or does not function properly. Before calling for assistance, let us see what can be done first: have you forgot to press one of...
Levelling the Appliance Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.
- Neutral Brown - Live CAUTION: The dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that maintenance can be done safely. As the colours of the wires in the mains lead may not...