Checking Propeller - Yamaha Z250 Owner's Manual

Maintenance
3
1. Tilt rod
2. Tilt support lever
3. Trim rods
4. Use the tilt support lever to lock the mo-
tor in the up position. Operate the tilt
down switch briefly so the motor is sup-
ported by the tilt support lever.
1. Tilt support lever
5. Check that the tilt rod and trim rods are
free of corrosion or other flaws.
6. Activate the tilt-down switch until the trim
rods have retracted completely into the
cylinders.
60
2
1
ZMU01940
7.
1
8.
NOTE:
ZMU04935
Consult your Yamaha dealer if any operation
is abnormal.
EMU29171

Checking propeller

EWM00321
You could be seriously injured if the en-
gine accidentally starts when you are
near the propeller.
Before inspecting, removing, or install-
G
ing the propeller, remove the spark
plug caps from the spark plugs. Also,
place the shift control in neutral, turn
Activate the trim-up switch until the tilt
rod is fully extended. Unlock the tilt sup-
port lever.
Tilt the outboard motor down. Check
that the tilt rod and trim rods operate
smoothly.
WARNING
ZMU01941
ZMU04936