Theme Settings - Pioneer AVIC-Z820DAB Operation Manual

Menu Item
[Connection Status]
[GPS Antenna]
[Positioning Status]
[Installation]
[Speed Pulse]
[Illumination]
[Back Signal]
[Vehicle Bus]*
* AVIC-Z920DAB/AVIC-Z820DAB/AVIC-Z720DAB/AVIC-Z7210DAB

Theme settings

CAUTION
Do not turn off the engine while importing an image from the external storage device.
The menu items vary according to the source.
Description
Check that the leads are properly connected between this
product and vehicle.
Displays the connection status of the GPS aerial ([OK] or
[NOK]) and the reception sensitivity.
NOTE
If reception is poor, change the installation position of the GPS
aerial.
Displays the positioning status (3D positioning, 2D
positioning, or no positioning), the number of satellites
used for positioning (orange), and the number of satellites
that have received signals (yellow). If signals from more
than three satellites are received, the current location can
be measured (page 153).
Indicates whether the installation position of this product
is correct or not. If installed correctly, [OK] appears. When
this product is installed at an extreme angle exceeding the
limitation of the installing angle, [NOK(Inst. Angle)] is
displayed. If the installation of this product is continually
changed and it is not firmly fixed into place,
[NOK(Vibration)] is displayed.
The speed pulse value detected by this product is shown.
Displays the status of headlights or small lamps of the
vehicle.
When the gearstick is gearchanged to "R" (reverse
position), the signal switches to [High] or [Low]. The signal
displayed varies depending on the vehicle.
Displays the status of the optional Vehicle Bus adapter.
- 129 -