Table of Contents
Advertisement
Timer On/Off
The Timer On/Off serves as an extra timer in the
kitchen that beeps when the set time has run out.
It does not start or stop cooking.
The Timer On/Off feature can be used during any
of the other oven control functions.
For example, to set 5 minutes:
1
Press Timer On/Off once.
0:00 appears and Timer flashes in the display.
2
Press 5.
0:05 appears in the display.
3
Press Timer On/Off to start the Timer. The
remaining time countdown appears in the
display.
NOTE
• If Timer On/Off is not pressed, the timer returns
to the time of day.
4
When the set time runs out, End shows in the
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
• Press Timer On/Off twice to set the time in
minutes and seconds.
• Press Timer On/Off once to set the time in
hours and minutes.
Canceling the Timer
1
Press Timer On/Off once.
The display returns to the time of day.
Wi-Fi
The Wi-Fi button is used to connect the appliance
to a home Wi-Fi network.
1
Set the oven mode knob to the OFF position.
2
Press and hold Timer On/Off for 3 seconds.
3
The power on chime sounds, SEt appears in
the display, and the Wi-Fi icon (
4
Connect the appliance to the Wi-Fi network
using the smartphone app.
5
To disconnect the appliance from the
network, delete it from the connected
appliances in the app.
NOTE
• See the "Smart Functions" section in the owner's
manual for more details.
Settings (Hour Mode, Convection
Auto Conversion, Oven Thermostat,
Preheat Alarm Light, Beeper
Volume, Fahrenheit or Celsius,
Cooktop On Alert Volume)
Press the Settings button repeatedly to toggle
through and change oven settings.
The Settings button allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
• set the cooktop on alert volume
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset
the clock to 24-hour mode, follow the steps below.
1
Press Settings once.
2
Press 1 to toggle between a 12-hour and 24-
hour clock.
3
Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25
14
. This auto converted temperature shows on
OPERATION
27
f
) blinks.
/
Advertisement
Table of Contents
