Troubleshooting; Purchase Record - GMC GMC1252G Manual

Storage
• Store this tool and its accessories after use in its case, in a dry, secure place out of the reach of children

Troubleshooting

No function when On/Off Trigger Switch (7) is operated
Cutting disc is off centre/vibrating eccentrically
Guarantee
To register your guarantee visit our web site at
www.gmctools.com and enter your details*.
Your details will be included on our mailing list (unless indicated otherwise) for information on future
releases. Details provided will not be made available to any third party.

Purchase Record

Date of Purchase:
Model: GMC1252G
Serial Number:
(located on motor housing)
Disposal
Always adhere to national regulations when disposing of power tools that are no longer functional and are
not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic equipment (WEEE), with household
waste
• Contact your local waste disposal authority for information on the correct way to dispose of power tools
No power
Lock-Off Button (5) not pressed in
Defective On/Off Trigger Switch
Grinding/cutting disc is overly worn
Deformed grinding/cutting disc
Grinding/cutting disc not fitted correctly
Retain your receipt as proof of purchase.
If registered within 30 days of purchase GMC guarantees to the purchaser of this product that if any
part proves to be defective due to faulty materials or workmanship within 24 MONTHS from the date
of original purchase, GMC will repair or, at its discretion, replace the faulty part free of charge. This
guarantee does not apply to commercial use nor does it extend to normal wear and tear or damage as
a result of accident, abuse or misuse.
* Register online within 30 days of purchase.
Terms & conditions apply.
This does not affect your statutory rights.
11
Check power supply
Make sure the Lock-Off Button (5) is depressed before operating On/Off
Trigger Switch
Replace the On/Off Trigger Switch at an authorised GMC service centre
Turn off the grinder, remove and replace the disc, as instructed in 'Fitting
a grinding or cutting disc'
Turn off the grinder, remove and replace the disc, as instructed in 'Fitting
a grinding or cutting disc'
Turn off the grinder and refit the disc as instructed in 'Fitting a grinding
or cutting disc'
GB