Letscom JDL-201 User Manual page 15

Password
Protection
Beep Sound
Format
Memory Card
Serial No.
Reset
Settings
Version
Set up a password to protect your
camera from unauthorized users.
If you forget the password, switch
the camera to the OFF mode, press
the Menu and Play keys at the same
On
time, and then switch the operating
Off
mode from OFF to SETUP. The
camera is unlocked. Then you can
set the Password Protection on and
set a new password in "MENU"--
"Password Protection".
If set On, the camera will beep when
On
you press any key of the camera in
Off
the SETUP mode.
All files will be deleted after
formatting the SD card. Highly
recommend you format the SD card
if it has been used previously in
Yes
other devices.
No
Caution: make sure wanted files on
the SD card have been backed up
before reformat, or they will be lost
permanently.
Select On to assign a serial
number to each camera you have.
You can use the combination of 4
digits to record the location in the
On
photos (e.g., 1234 for Yellow Stone
Off
Park). This helps multi-camera
users identify the location when
reviewing the photos.
Select Yes to return all your
Yes
previous settings back to the
No
manufacturer default.
Display the version of the camera.
Defined
- 12 -