Letscom JDL-201 User Manual page 13

Video
Resolution
(affects video
clips only)
Video
AVI 5s, optional
Length
from 3S to 10M
(affects video
clips only)
Audio
Recording
Shot Lag
Sensitivity
Motion
Sensors
(Sense
level)
Target
Recording
Time
1920×1080
1280×720
720×480
640×480
On
Off
1 minute,
optional from
5S to 60M
Low,
Middle,
High
On
Off
- 10 -
Select video resolution (pixels per
frame). Higher resolution produces
better quality videos, but creates
larger files that take more of the SD
card capacity.
Videos are in AVI format that can be
played back on most video players.
Long the recording, larger the file
size.
If set On, videos have sound; if set
Off, videos have no sound. Videos
without sound take less of the SD
card capacity.
Select the shortest length of time
that the camera will wait until it
responds to any subsequent triggers
from the PIR sensor after a game is
first detected. During the selected
interval, the camera will not take
pictures/videos. This prevents the
SD card from filling up with too
many redundant images.
Select the sensitivity of the PIR
sensor. The High setting suits
indoors and environments with little
interference, while the Middle/Low
suits outdoors and environments
with more interference. Temperature
also affects the sensitivity. The High
setting is suitable when the ambient
temperature is warm, and the Low
setting is helpful in cold weather.
Select On if you only want the camera
to work within a specified time period
every day. For instance, if the starting
time is set at 18:35 and the ending
time at 8:25, the camera will function
from 18:35 the current day to 8:25 the
next day. Outside the time period, the
camera will not be triggered or take
photos/videos.