Setup Mode; Playback On The Camera Screen - Letscom JDL-201 User Manual

Note:
When the power switch is set to ON position, the camera requires
30-60 seconds for PIR Sensor to initialize.

3. SETUP MODE

In the SETUP mode, you can check and change the settings of the
camera with the help of its built-in LCD. These settings, found in the
menu by pressing the Menu key, let you change the photo or video
resolution, switch the time imprint on, etc.
Moving the power switch to the SETUP position will turn on the LCD
display, and you will see an information screen that shows the time
and date, battery level, camera or video mode, etc. The screen dims
after 2 minutes of no operation.
Shortcut Keys/Functions
As mentioned earlier in "At a Glance", the keys have secondary,
"shortcut" functions when the camera is switched to SETUP mode:
Press the OK key to quickly set the camera to shoot video clips.
Press the Right key to quickly set the camera to take still photos.

4. PLAYBACK ON THE CAMERA SCREEN

Once you have some photos or videos in the SD card, you can
directly playback them on the screen. In the SETUP mode, press the
Play key to playback/stop playing back the photo or video, press the
Left key to the previous photo or video, and press Right key to the
next one. Press the OK key play/pause video playing and press the
Menu key to stop video playing. There are more instructions during
the playback reviewing, see the following tips:
Tips 1: How to identify photos - Please see
the RECTANGLE identifier, and megapixel
likes 16M on the top-left corner of the
screen.RECTANGLE identifier and
megapixel likes 12M on the top-left corner of
the screen)
Tips 2: Press the MENU key to manage the
stored photos/videos during scrolling photos
or videos. You can Delete current file/Delete
all files/Activate slide show/Write protect the
photos and videos you want. Press the
MENU key again to go back.
- 8 -