REPA MILLENNIUM V8 BASIC PLUS Instruction Manual page 19

To access the various sections and modify the data, proceed as indicated below:
Press and hold the buttons at the same time
Press the button to enter the time section.
Press the button to access the desired section.
Press the button on the display and the digits on the right will start flashing.
Modify at will with the buttons
Confirm data with button
RAPID CONTROL OF REGENERATION PHASES
To manually start a regeneration process and monitor the correct operation of the individual phases of the blackout cycle,
follow the instructions:
Press and hold the buttons at the same time
Press the button and a complete regeneration process will immediately start.
If you wish to proceed directly to a subsequent regeneration phase, press the button
.
.
for 5 seconds until you hear the beep and the key pad is unlocked.
or 5 seconds until you hear the beep and the key pad is unlocked.
.
19