REPA MILLENNIUM V8 BASIC PLUS Instruction Manual page 12

4) HOW TO START A REGENERATION PROCESS MANUALLY
Based on customer requirements, a regeneration process can be started manually at any time. Note that while the process is
ongoing the water softener will deliver unsoftened water.
To start a regeneration process manually, follow the instructions below:
Press the arrow buttons
Press the button . A complete regeneration process will start immediately.
2.2.4 MODEL VOLUME
• Connect the plug from the transformer to that of the valve.
Insert the transformer into a socket, making sure that it complies with the regulations.
• As soon as the valve is powered up, the timer icons and display will light up.
PICTURE 9
Display 1
• Subsequently a message showing the model of the valve will appear on the display (69P3) .
PICTURE 10
Display 2
12
simultaneously and hold for 5 seconds. A beep sound will signal the unlocking of the keypad.
m m /h
D M
m m /h
D M