3-1
Removing Chassis Cover
Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the chassis cover:
1.
Remove the screw securing the chassis cover.
2.
Loosen the thumbscrew securing the chassis cover.
3.
Push down the indentations located on the sides of the chassis cover.
4.
Slide the cover forward towards the rear of the system and then remove the cover in the direction
indicated by the arrow.
5.
To reinstall the chassis cover reverse steps 1-4.
2
3
4
- 29 -
1
3
System Hardware Installation