Gigabyte R262-ZA1 User Manual page 94

Parameter
Action on BIST Failure
Fast short REP MOVSB
Enhanced REP MOVSB/
STOSB
REP-MOV/STOS Streaming
X3D
IBS hardware workaround
BIOS Setup
Description
Action to take when a CCD BIST failure is detected.
Options available: Do nothing, Down-CCD, Auto. Default setting is Auto.
Default is 1, cab be set to zero for analysis purpose as long as OS supports
it.
Options available: Disabled, Enabled. Default setting is Enabled.
Default is 1, cab be set to zero for analysis purpose as long as OS supports
it.
Options available: Disabled, Enabled. Default setting is Enabled.
Allows REP-MOVS/STOS to use non-caching streaming stores for large
sizes.
Options available: Disabled, Enabled. Default setting is Enabled.
Override of X3D technology.
Options available: Auto, Disable, 1 stack, 2 stacks, 4 stacks. Default setting
is Auto.
Sets if using IBS execution sampling without software workaround for
erratum 1,285. May impact performance.
Options available: Auto, Enabled. Default setting is Auto.
- 94 -