Product Specifications - Gigabyte R262-ZA1 User Manual

Amd epyc 7003 up server system - 2u 14-bay
Table of Contents

Advertisement

1-2

Product Specifications

NOTE:
We reserve the right to make any changes to the product specifications and product-related
information without prior notice.
System
Dimension
CPU
Chipset
Hardware-
Level Root of
Trust Support
Memory
LAN
Video
Storage
Hardware Installation
2U
Š
438mm (W) x 87.5mm (H) x 730mm (D)
Š
AMD EPYC™ 7003 series processor family
Š
Single processor, 7nm technology
Š
Up to 64-core, 128 threads per processor
Š
Fully support 280W
Š
Compatible with AMD EPYC™ 7002 series processor family
System on Chip
Š
Supported
Š
NOTE! The system will take extra time to boot as it goes through RoT
authentication.
16 x DIMM slots
Š
DDR4 memory supported only
Š
8-Channel memory architecture
Š
RDIMM modules up to 128GB supported
Š
LRDIMM modules up to 128GB supported
Š
3DS RDIMM/LRDIMM modules up to 256GB supported
Š
Memory speed: Up to 3200*/ 2933 MHz
Š
- Note:
* Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
2 x 1GbE LAN ports (1 x Intel® I350-AM2)
Š
1 x 10/100/1000 management LAN
Š
Integrated in Aspeed® AST2500
Š
2D Video Graphic Adapter with PCIe bus interface
Š
1920x1200@60Hz 32bpp
Š
Front Side: 12 x 3.5" hot-swappable HDD/SSD bays
Š
» R262-ZA1
- *12 x blue HDD/SSD trays compatible with SATA/SAS devices
» R262-ZA2
- 4 x green HDD/SSD trays compatible with SATA/SAS/NVMe devices
- 8 x blue HDD/SSD trays compatible with SATA/SAS devices, enabled by
optional SAS Card
Rear Side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Š
SAS card is required to enable the drive bays
Š
- 12 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

R262-za2

Table of Contents