Table of Contents
Advertisement
5
Operating the product
1
2
1.
On/Off key
2. Programme Selection / Programme
Cancel (3 seconds) key
3. Function keys
F1
Half Load Function
F2
Fast+ Function
SteamGloss function
F3
F4
AquaActive
4. Programme indicator
Keys
On/Off key
When you press On / Off key, indicator
lights illuminate on the display for ON
position. The lights turn off in OFF position.
Programme Selection /
Programme Cancel key
Press this key until the desired programme
appears in the programme indicator.
To cancel the running program, keep the
Programme Selection /Programme Cancel
key pressed for 3 seconds.
Function keys
If you press any of the Function keys
during programme selection or time delay
selection, an affirmative key signal will be
heard provided that the relevant function
is supported by the selected programme.
Function will be deemed selected when the
indicator of the selected function is lit.
To cancel the selected function, keep the
function key pressed until the function
indicator disappears.
Dishwasher / User's Manual
3
4
5
13
6
7
8
12
11
5. Salt indicator
6.
Not in use
7. Start / Cancel indicator
8. Time Delay / Programme Time indicator
9. Time Delay key
10. Time Delay indicator
11. End of Programme indicator
12.
Not in use
13. Rinse Aid indicator
Preparing the machine
1.
Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
Programme selection
1.
Press On/Off key to turn on your
machine.
2. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
3. Selected programme will start when
you close the door of your machine.
3
9
10
23 / 38 EN
Advertisement
Table of Contents
