Acer Veriton 7600GT User Manual page 125

1. Select the source disk that you wish to use and then click Next.
Important: It is very important to note which disk is the source disk
(the one containing all of the information to be migrated) and
which one is the target disk. On a RAID Ready system, this can be
determined by making a note during POST of which port (e.g. Port
0 or Port 1) the single disk is attached to. You can also use the Intel
Application Accelerator RAID Edition utility before the second disk
is installed to verify the Port and serial number of the drive that
contains all the data.
2. Select the RAID volume name and strip size, and click Next.
• RAID Volume Name - A desired RAID volume name needs to be
typed in where the RAID_Volume1 text is shown above. The RAID
volume name has a maximum limit of 16 characters. The RAID
volume name must be in English alphanumeric ASCII characters.
• Strip Size - Select the desired strip size setting. As indicated, the
optimal setting is 128KB. Selecting any other option may result in
performance degradation. Even though 128KB is the
119