Replacement Of Parts; Specifications - Panasonic NC-BG4000 Operating Instructions Manual

Replacement of Parts

Rubber gasket set
Replace gaskets if they crack, lose their pliability
or, for any other reasons which allow steam to
escape from between the container and the lid.
Remove lid, unscrew 3 tapping screws and remove
the lid cover.
Exchange the gaskets and then place the lid cover
back and secure with the tapping screws.
Specifications
Model No.
Power supply
Power consumption
Average power consumption in
keeping warm (approx.)
Amount of water: maximum
Room temperature: 20°C
Dimensions
(when the handle is
tilted)
Weight (including power cord) (approx.)
Rated capacity (approx.)
* Under certain conditions, such as at very high altitudes and in intense cold, the unit may not function
properly. Please avoid using the unit in such conditions.
* If the unit is not used during cold conditions, make sure to empty it of water. The water left in the inner
container may freeze causing damage.
01_OM_NC-BG4000-PZ05H6913_EN.indd 17 01_OM_NC-BG4000-PZ05H6913_EN.indd 17
Lid cover
Remove gaskets
at 98
at 90
at 80
at 70
Height (approx.)
Width (approx.)
Depth (approx.)
Mesh filter
Replace the filter, if foreign matter which clog
the filter cannot be removed, even after you
scrub with a cleaning brush, etc.
For replacement parts, please
contact an authorized dealer.
Part name
Rubber gasket set APH65-480
Mesh filter APB97-480-0U
NC-BG4000
220V 50Hz
700 W
28 Wh
23 Wh
19 Wh
15 Wh
32.4 cm
21.7 cm
28.7 cm
2.5 k g
4.0 L
The filter can be
removed by pulling
firmly on it.
Part No.
NC-BG3000
27 Wh
22 Wh
19 Wh
15 Wh
27.5 cm
21.7 cm
28.7 cm
2.3 k g
3.0 L
17
24/11/2564 BE 16:22 24/11/2564 BE 16:22