Removing the Intrusion Alarm Cable Module
1.
See "Removing the Housing Cover" on page 73
2.
See "Removing the FDD and DVD Frame" on page 75
3.
Disconnect the cable from the main board , use the flat screwdriver to release the latches and then detach
the intrusion alarm cable module from the FDD and DVD frame.
Removing the DIMM
1.
See "Removing the Housing Cover" on page 73
2.
See "Removing the FDD and DVD Frame" on page 75"
3.
Press the levers on both sides of the DIMM socket outward to release the DIMM, and then gently pull the
DIMM out to remove it.
4.
Put the levers back to the original position.
77
Veriton 3500/5500/7500