Disk Drives - Acer Veriton 5100 Service Manual

Disk Drives

Select Disk Drives from the main menu to configure the drives installed in your system.
NOTE: The following screen shows the Disk Drives menu:
The asterisk (*) mark indicates that the parameter appears only when you are in the Advanced Level.
Diskette Drive A .................[1.44 MB 3.5-inch]
Diskette Drive B .................[None]
!
* IDE Primary Channel Master
!
* IDE Primary Channel Slave
!
* IDE Secondary Channel Master
!
* IDE Secondary Channel Slave
The following table describes the parameters found in this menu.
Parameter
Diskette Drive A / B
IDE Primary Channel Master
IDE Primary Channel Slave
IDE Secondary Channel Master
IDE Secondary Channel Slave
Chapter 2
Disk Drives
Description
Allows you to configure your floppy drive
Lets you configure the hard disk drive
connected to the master port of IDE channel
1.
Lets you configure the hard disk drive
connected to the slave port of IDE channel 1.
Lets you configure the hard disk drive
connected to the master port of IDE channel
2.
Lets you configure the hard disk drive
connected to the slave port of IDE channel 2.
Options
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
1.44 MB, 3.5-inch
2.88 MB, 3.5-inch
33