Removing The Power Supply; Removing The Intrusion Alarm Cable Module; Removing The Led Activity Indicators Module - Acer Veriton 3600G Service Manual

Removing the Power Supply

1. See "Removing the Housing Cover" on page 76
2. See "Removing a Dummy Link Bar" on page 77
3. See "Removing a Link Bar" on page 77
4. Disconnect the FDD power connector from the FDD drive and the HDD power connector from the HDD..
5. Disconnect the CD-RW power connector from CD-RW drive and DVD-ROM power connector from DVD-
ROM drive.
6. Disconnect the main power connector and 12 Volt. power connector from the main board. Remove the
four screws that hold the power supply to the housing and detach the power supply from the housing.

Removing the Intrusion Alarm Cable Module

1. See "Removing the Housing Cover" on page 76
2. Disconnect the cable as shown here, remove the one screw here, and then detach the intrusion alarm
cable module from the housing.

Removing the LED Activity Indicators Module

1. See "Removing the Housing Cover" on page 76
2. Press the LED activity indicators module to release the latches in the direction as shown here, and then
detach the module from the housing.
Veriton 3600(D/G)/5600(D/G)/7600(D/G) 85