Removing the Hard Disk Drive
1.
See "Removing the Housing Cover" on page 63
2.
See "Removing the FDD and DVD Frame" on page 65
3.
Disconnect the hard disk drive IDE from the main board. Detach the hard disk drive power connector and
hard disk drive IDE cable from the hard disk drive.
4.
Remove the two screws as shown here and then hold the hard disk drive frame.
5.
Slide the hard disk drive frame to the right and then gently move it inward to detach it from
the lower case. Remove the four screws as shown and then detach the hard disk drive from the frame.
70
Chapter 3