Acer Veriton 3200 Service Manual page 42

Parameter
Silent Boot
Num Lock After Boot
Memory Test
Configuration Table
Update BIOS w/ Boot Block When enabled, it automatically flashed the BIOS
Network Boot ROM
Language Type
35
Description
When enabled, BIOS is in graphical mode and
displays only an identification logo during POST
and while booting. Then, the screen displays the
operating system prompt (as in DOS) or logo (as
in Windows). If any error occurs while booting,
the system automatically switches to the text
mode.
You may also switch to the text mode while
booting by pressing F9 after you hear a beep that
indicates the activation of the keyboard.
Allows you to activate or deactivate the Num
Lock function upon booting.
Lets you specify whether you want BIOS to
perform or bypass the memory test. This
parameter is only available when Fast Boot is
disabled.
This parameter allows you to enable or disable
the display of the configuration table after POST
but before booting. The configuration table gives
a summary of the hardware devices and settings
that BIOS detected during POST.
file from the hard disk drive in case the system
fails to boot up.
Allows you to enable or disable the control of the
local area network (LAN) BIOS. Setting this
parameter to Disabled speeds up the booting of
the computer.
Select the language.
Options
Enabled or Disabled
Enabled or Disabled
Disabled or Enabled
Enabled or Disabled
Disabled or Enabled
Disabled or Enabled
English or Japanese
Chapter 2