Acer Veriton 3200 Service Manual page 40

Parameter
Power Switch < 4 sec.
System Wake-up Event
Modem Ring Indicator
PCI Power Management
RTC Alarm
Resume Day
Resume Time
Restart on AC/ Power Failure
ACPI Sleep State
33
Description
Lets you specify whether to automatically
turn off the machine or put the system to
Suspend mode when the power switch is
pressed for less than 4 seconds.
Lets you specify the activity that will resume
the system to normal operation.
Wakes the system from Sleep mode once
any fax/modem activity is detected.
Allows the system to be awaken by the PME
function.
Allows you to set a certain time on a certain
day to wake-up your system from suspend
mode.
If RTC alarm is enabled, the system will
resume operation at the time indicated here.
If RTC alarm is enabled, the system will
resume operation at the time indicated here.
When power failure occurs, your system
automatically stops functioning. Setting this
parameter to Enabled lets you set your
computer to automatically turn on once
power resumes. The Disabled setting
leaves the computer off.
When set to S1, system enters standby
mode when power management mode is
enabled. When set to S3, system enters
suspend to RAM mode.
Options
Suspend or Power Off
Disabled or Enabled
Enabled or Disabled
Disabled or Enabled
User Input
User Input
Disabled or Enabled
S1 or S3
Chapter 2