Installation; Minimum System Requirement; Install Ip Camera(S); Install Capture Card(S) - LevelOne FCS-8004 User Manual

IP CamSecure

Installation

Installation

Minimum System Requirement

CPU
RAM
Mother-
board
Display
Hard Disk
OS

Install IP camera(s)

Step 1: Set up the IP camera referring to the quick installation guide provided.
Step 2: Check the network between the IP camera and the system.
Step 3: Add the IP camera to the system. See details on later pages.

Install capture card(s)

Step1: Insert the card onto an empty PCI slot. Connect the Audio/Video Cable to the connector in
the same color.
Step 2: Turn on your PC and start Windows.
Step 3: Insert the included Software CD into CD-ROM.
Step 4: Run SetupDrv.exe from the CD-ROM driver/ directory to install the Capture Card driver.
Step 5: Run dxdiag.exe from start menu 'Start-> Run' to check your DirectX version. If the installed
version is less than 9.0, install DirectX 9.0 from the CD-ROM directx9/ directory.
Step 6: After driver being installed, restart your PC.
IP CamSecure
Intel Pentium D 930
1 GB
Intel 845 or 865 chip, Intel Chipset recommended
ATI Radeon 9200, nVIDIA GeForce FX-5200, Intel 845G/865G, or
above (ATI recommended)
80 GB or above
MS Windows 2000 / XP
FCS-8004
Intel P4 2.4 GHz
512 MB
3