Safety; Features - Excell 120S User Manual

EXCELL PRECISION CO., LTD

Safety

 When the instrument is installed, connect an earth bonding conductor from FG to the earth
connection marked "
 Disconnect the mains power supply before opening the instrument housing.
 To install the optional interface cards, it is necessary to disconnect the mains power supply
and fit a yellow/green earth bonding cable to the rear panel.
 Before turning the power on ensure the supply voltage is within the acceptable range,
AC100V ~ 240V 50/60HZ.
 The operating ambient temperature range is 0

Features

120S has a wide range of applications from batching to simple weighing.
Features:

Stand alone batching mode or connect to PLC for external system control

Built in batching / dosing functions

Manual / automatic discharge operation

Set cycle times in a batch

Totalise weight and number of cycles

Key in the signal voltage value (mV / V) directly via the keypad, no need to apply
any weight to the bottom work to calibrate the weigher

Display load cell output voltage (mV / V) for future maintenance

Adjustable filter

RS232C bi-directional and RS485 communication
 Built in MODBUS
Interface options:

OP-01 RS-422 / RS-485 / RS-232 serial interface

OP-02-1 BCD parallel output interface (Open collector output)

OP-02-2 BCD parallel output interface (TTL output)

OP-03 16 Bit Analogue current/voltage output interface
(4 ~ 20 mA / 0 ~ 10 V)

OP-04 Control I/O (4 In / 4 Out) + Setpoint In (BCD code)

OP-05 Control I/O (8 In / 8 Out)
040112XX
".
!
3
o o
C ~ 40 C (32 °F ~ 104 °F).
ZSME400000004