Replacing The Hard Disk - Acer Power Sd User Manual

64
2. Align the DDR DIMM with the socket (1). Press the DDR DIMM into
the socket until the clips lock onto the DDR DIMM (2,3).
Note: The DDR DIMM sockets are slotted to ensure proper
installation. If you insert a DDR DIMM but it does not fit easily
into the socket, you may have inserted it incorrectly. Turn the DDR
DIMM and try to insert it again.
Reconfiguring your computer
Your computer automatically detects the amount of memory installed.
Run the BIOS (Basic Input/Output System) Setup utility to view the new
value for total system memory and make a note of it. For more
information on BIOS Setup utility, refer to the AcerPower Sd online
guide (see "Accessing the online guide" on page 6).

Replacing the hard disk

Follow these steps to replace your computer's hard disk:
1. Remove the side panel (see page 53).
2. Locate the hard disk frame.
4 Upgrading your computer