Turning On Your Computer - Acer Power Sd User Manual

Turning on your computer

After connecting the necessary peripherals and plugging in the power
cable, you are now ready to turn the computer on and get to work.
To turn on your computer:
1. Turn on all peripherals connected to your computer such as the
monitor, printer, fax, speakers, etc.
2. On the rear panel of your computer, set the voltage selector switch
to the voltage range applicable to your area. Refer to page 13 for
the location of the voltage selector switch on the rear panel of
your computer.
Note: The illustration of the computer's rear panel shown below
may be different from your computer model. If your computer
model comes with a main power switch located above the voltage
selector switch, first set the voltage selector switch to the voltage
range applicable to your area before turning on the main power
switch.
35