Robertshaw RS9220 Operation Manual page 8

THERMOSTAT QUICK REFERENCE
Temperature Adjustment
(if Using a Program Schedule)
Temporary Adjustment: You may temporarily change the desired
temperature set-point by pressing either or . The temperature
will remain at this set-point until the next programmed WAKE, LEAVE,
RETURN, or SLEEP event. The program schedule will then resume.
Program Schedule Hold: The thermostat will display HOLD and
RUN SCHED on the left of the screen when you press either
or . You may hold the temperature at a fixed temperature
set-point and override the program schedule by pressing HOLD.
The thermostat will display HOLD below the temperature set-point
to notify you that the program schedule hold is in effect.
To Return to Programming: Press RUN SCHED to return to the
program schedule.
6