The Front Indicator Is Lit In Orange; The Front Indicator Is Lit In Red; I Want To Put This Unit Back Into The State It Was In At The Time Of Purchase - I-O DATA HFAS1-XS20U Setup Manual

The front indicator is lit in orange.

• A new version of firmware/software for this unit has been detected.
Please turn off the power supply to this unit, and then turn it on again.
This firmware/software for this unit will be updated to the latest version.

The front indicator is lit in red.

• It is possible that the USB HDD for backup does not have enough free space.
Please see the Quick Guide, access the USB HDD for backup from a computer, and
delete any unnecessary files.
• It is possible that a problem has occurred with the USB HDD for backup.
Please confirm whether the USB HDD for backup is correctly connected.
If it is connected correctly, there is a possibility that the USB HDD has failed.
In addition, please use this unit to format the USB HDD when connecting it for the first time.
• It is possible that a problem has occurred with the internal disk of this unit.
Remove a USB HDD if it is connected.
(>> 2.2.3. Removing the USB HDD
Then, please turn off the power supply to this unit, and then turn it on again.
After the start-up process has completed, if the lamp is lit in red then a problem has
occurred with the built-in disk.
Please see the "Conformity Information and Warranty", and contact our Support.

I want to put this unit back into the state it was in at the time of purchase.

By initializing the system, you can return all the settings of this unit to those at the time of
purchase, and delete data on this unit.
1
2.1. Open the Settings Screen
2
Go to [Table of Contents]
8)
Click [SYSTEM INITIALIZATION]
46
4. Troubleshooting