Disk Management - I-O DATA HFAS1-XS20U Setup Manual

3.6. DISK MANAGEMENT

Check Disk
Spanning Format
Striping Format
Mirroring Format
Go to [Table of Contents]
Checks the status of the built-in disk of this unit.
Depending on the capacity and condition of this unit, [Check Disk] may take
20 or 30 hours. In addition, you cannot access this unit while [Check Disk] is
running.
Deletes all the data on this unit and switches the mode of the built-in disk.
Depending on the capacity and condition of this unit, formatting may take 20
or 30 hours.
In addition, you cannot access this unit while a disk is being formatted.
>> 2.8. Switching the Mode of the Built-in Disk (RAID)
42
3. Details of the Settings screen – 3.6. DISK MANAGEMENT
22