I-O DATA HFAS1-XS20U Setup Manual page 32

RAID status
Displays the status of this unit.
If an error such as [RAID starting failed] or [Degraded] is displayed in red, please reboot this unit once.
If you the same error is still displayed, please see the Quick Guide or contact our Support.
Backup status
Displays the status of the backup function.
Off
Running
Running (currently
backing up)
Unconnected
Stopping
Unknown
Error
AccurateRip
Displays the AccurateRip support status of the connected CD/DVD/BD drive.
Go to [Table of Contents]
[AUTO BACKUP] (3.3. SYSTEM SETTINGS (page 33)
A USB HDD for backup is connected, and the system is in a state where
backup is possible.
Music is being backed up to a USB HDD for backup.
A USB HDD for backup is not connected.
A USB HDD for backup is connected, but is not being used.
The following situations can be considered.
• It is not a USB HDD for backup that is registered in this unit.
• After the USB HDD for backup was registered, this unit was formatted/
initialized.
An unknown error occurred in the backup.
Operation has become unstable for some reason.
Please remove the USB HDD for backup and reboot this unit.
>> 2.2.3. Removing the USB HDD
An error occurred in the backup.
The following situations can be considered.
• There is not enough space on the USB HDD for backup.
Please see the Quick Guide, access the backup destination (bkup folder)
from a computer, and delete any unnecessary files.
• A USB HDD for backup is not correctly connected.
32
3. Details of the Settings screen – 3.2. SYSTEM INFORMATION
is off.
8