Wireless Remote Controller - LG S10SIV Owner's Manual

Wireless Remote Controller

The controls will look like the following.
PLASMA
5
12
4
2
6
ON
OFF
10
7
13
Operation Mode
Cooling Operation
Auto Operation or Auto Changeover
NOTE
To use the functions printed in blue at the bottom of the
nd
function button. Pressing the 2
blue printed function of the respective button. To cancel
the function press the 2nd F button again else it will
automatically cancel if remains idle after 10 seconds.
Signal transmitter
1
3
9
CANCEL
8
SET 11
AUTO CLEAN
15
14
Flip-up door
(opened)
F button activates the
nd
1. START/STOP BUTTON
2. OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3. ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SELECTOR BUTTON
Used to select fan speed in four steps
low, medium, high and CHAOS.
5. JET COOL BUTTON
Used to start or stop the speed cooling.
(It operates fan in super high speed in cooling mode)
6. ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping
operation.
7. TIME SETTING BUTTONS
Used to adjust the time.
8. TIMER SET/CANCEL BUTTON
Used to set and to cancel the timer operation.
9. SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
10. ENERGY-SAVING COOLING MODE BUTTON
Used to set energy-saving cooling mode operation.
11. ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
12. CHAOS SWING BUTTON
Used to stop or start louver movement and
13. RESET BUTTON
Used prior to resetting time.
14. 2nd F BUTTON
Used prior to using modes printed in blue at the
bottom of buttons.
15. AUTO CLEAN BUTTON
Used to set auto clean mode.
In some models this button has a 2nd function of LED
luminosity control.
Operating Instructions
Owner's Manual 9