Vertical Vane Control; Horizontal Vane Control; Jet Cool Operation - LG S10SIV Owner's Manual

Operating Instructions
1. Press the Start/Stop button to start the unit.

Jet Cool Operation

You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or
INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.
NOTE
• Jet cool function cannot be activated during heating or auto changeover operations.
• In case of Inverter, Art Cool and Art Cool Wide(non-Deluxe) model, you can use jet heat function by
pressing JET COOL BUTTON for heating operation.
• Art Cool and Art Cool Wide models close the side discharges during jet cool/heat operation, for strong
cooling and heating.
14 Air Conditioner
1. Press the Start/Stop button to start the unit.
2. Open the door on the remote control.
and the louvers will swing left and right.
again to set the horizontal louver at the desired
Jet cool function can be used to cool the room quickly in hot summer. When this
function is turned on, the air conditioner runs in cooling operation mode with super
high fan speed and 18 °
cooling.
Similarly, jet heat function (available only in some models) warms up the room quickly
by operating at super high fan speed and 30 °C setting temperature for 60 minutes.
NOTICE
Always use the remote control to adjust the
damage the air conditioner.
direction louver will close the air outlet vent of the
system.
(Optional)