Operating And Safety Tips; Cleaning And Maintenance; Tips And Hints - Cuisinart EVOLUTIONX RPB-100 Instruction/Recipe Booklet

OFF. Remove the travel cup from the base.
5. Turn cup right-side up, turn blade assembly counterclockwise to
remove.
NOTE: Do not fill with ingredients/liquid past the max fill line.
NOTE: Maximum runtime of a single blending cycle is one minute.

OPERATING AND SAFETY TIPS

Place cover on firmly.
Don't place blade onto blender base without the blending cup
attached.
CAUTION: NEVER use carbonated beverages in the blending cup.
®
by Cuisinart . Doing so may result in injury.

CLEANING AND MAINTENANCE

The base and parts are made of corrosion-resistant materials that are
easy to clean. Before first use and after every use, clean each part
thoroughly. Periodically check all parts before reassembly. DO NOT USE
if any part is damaged, or the cup is chipped or cracked. To remove
blade assembly, twist off by turning counterclockwise. NEVER TOUCH
THE BLADE ITSELF.
CAUTION: Handle the blade assembly carefully. The blades are SHARP
and may cause injury. DO NOT attempt to remove blades from cutting
assembly.
Wash all parts in warm, soapy water; rinse and dry thoroughly. All parts
are top rack dishwasher safe.
Tip: You may wish to clean your blade assembly as follows: Squirt a
small amount of dishwashing liquid into travel cup and fill halfway with
warm water. Attach blending blade assembly. Run for 15 seconds.
Repeat, using clean tap water. Carefully disassemble parts and empty
cup. Rinse and dry all parts thoroughly. Finally, wipe the motor base
clean with a damp cloth to remove any residue, and dry thoroughly.
Never submerge the motor base in water or other liquids, or place in
a dishwasher.
Any other servicing should be performed by an authorized service
representative.

TIPS AND HINTS

7