Panasonic NR-TV341B Operating Instructions Manual page 10

How to clean the refrigerator
Removing glass tray PC / FC,
glass tray crisper for cleaning
Removing
1 . Lift the tray upward
then pulling it
forward until
removing.
2 . For tray cool zone,
tilt the tray slightly
upward for easier removing.
Attaching
3 . Place tray on both supporters, then
push until it reaches the end.
Remark:
When removing tray above vegetable

case, pull out the vegetable case first and
then follow to remove the tray as above
details.
In case of attaching the tray and it does

not lock, make sure that you did not
attach the wrong tray.
Make sure that you don't attach the upper

side of the tray downward.
Removing
1 . Tilt up the pan water evap a bit and then
lift it upward until the pan water evap hole
unlocks from the pan water evap hook.
2 . Pull the pan water evap until it touches
with the evap pipe then carefully take
it out under the evap pipe.
10
Removing pan water evap for cleaning
Removing vegetable case,
Ag Hygiene case for cleaning
Removing
1 . Pull the case until
it reaches the end
of stopper.
2 . Raise up the front
of case a bit and
then completely
take out.
Attaching
1 . Keep the lid on
the vegetable case
lifting until case is attached.
2 . Raise it up and place case on both
supporters.
3 . Push the case until it reaches the end.
Removing shelf egg, shelf bottle,
shelf FC for cleaning
Removing
1 . Lift it upward,
alternating
between the right
and left side.
Attaching
2 . Place it on both supporters, and
then press until it reaches the end of
supporters.
Attaching
1 . Insert the pan water evap under the evap pipe.
2 . Insert the pan water evap hole into the hook pan
water evap as well as press-fitting both sides.
Remark: Check the status to make sure evap
pipe does not touch the pan water evap.
Hook pan
water evap
Evap pipe