Sharp PN-R706 Operation Manual page 59

Model
LCD component
Max. resolution
Max. colors
Pixel pitch
Max. brightness (typical)
Contrast ratio (typical)
Viewing angle
Screen active area
Computer input signal
Sync signal
Plug and play
Power management
Input terminals Video
Audio
Serial (RS-232C)
Video
Output terminals
Audio
Serial (RS-232C)
LAN terminal
Power supply terminal
Expansion slot
Speaker output
Power requirement
Operating temperature *
3
Operating humidity
Power consumption
(Input signal waiting mode *
Dimensions (excluding protrusions)
Weight
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness.
*2 D-Sub input terminal only.
*3 When using the monitor laying flat on a surface (when the monitor is tilted more than 20 degrees upward or downward from the
perpendicular in relation to a level surface), use the monitor at a temperature between 32°F (0°C) to 86°F (30°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*4 When SUPPLY USB POWER is set to POWER ON ONLY and no optional part is attached.
*5 When POWER SAVE MODE is set to ON, SUPPLY USB POWER is set to POWER ON ONLY, and no optional part is attached. When
POWER SAVE MODE is set to OFF: 0.8 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
PN-R556
55" Class [54-5/8 inch
(138.78cm) diagonal]
TFT LCD
(pixels) 1920 x 1080
Approx. 1.07 billion colors
0.630 mm (H) ×
0.630 mm (V)
700 cd/m
1300: 1
178° right/left/up/down (contrast ratio ≥ 10)
inch (mm) 47-5/8 (W) x 26-13/16 (H)
(1209.6 x 680.4)
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω],
DisplayPort 1.2, HDMI
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green*
Composite sync (TTL: positive/negative)
VESA DDC2B
VESA DPMS, DVI DMPM
HDMI x 2
DVI-D 24 pin (HDCP compatible) x 1
Mini D-sub 15 pin, 3 rows x 1
DisplayPort x 1
3.5 mm mini stereo jack x 1
D-sub 9 pin x 1
DisplayPort x 1
3.5 mm mini stereo jack x 1
D-sub 9 pin x 1
10 BASE-T/100 BASE-TX
5 V, 2 A (5 V, 500 mA when the expansion slot is used)
(USB Type-A connector)
12 V, 2.4 A
(power supplied when expanding the functions with an optional part)
10 W + 10 W
AC 100 - 240 V, 2.0 A,
50/60 Hz
32°F to 104°F (0°C to 40°C)
20% to 80% (no condensation)
175 W
/ standby mode * ) (2.5 W / 0.5 W)
4 5
inch (mm) Approx. 48-7/16 (W) x
2-1/4 (D) x 27-5/8 (H)
(1231 x 57 x 702)
lbs. (kg) Approx. 55.1 (25)
PN-R496
49" Class [48-1/2 inch
(123.20cm) diagonal]
TFT LCD
0.559 mm (H) ×
0.559 mm (V)
2 * 1
42-1/4 (W) x 23-3/4 (H)
(1073.8 x 604.0)
AC 100 - 240 V, 1.8 A,
50/60 Hz
155 W
(2.5 W / 0.5 W)
Approx. 43-1/8 (W) x
2-1/4 (D) x 24-5/8 (H)
(1095 x 57 x 626)
Approx. 43 (19.5)
Specifications
PN-R426
42" Class [41-7/8 inch
(106.47cm) diagonal]
TFT LCD
0.483 mm (H) ×
0.483 mm (V)
36-9/16 (W) x 20-9/16 (H)
(927.94 x 521.96)
*2
AC 100 - 240 V, 1.5 A,
50/60 Hz
135 W
(2.5 W / 0.5 W)
Approx. 37-3/8 (W) x
2-1/4 (D) x 21-3/8 (H)
(949 x 57 x 543.5)
Approx. 34.2 (15.5)
2
,
59
E