Sharp PN-R706 Operation Manual page 16

Preparing the Remote Control Unit
[PN-R556/PN-R496/PN-R426]
For the monitor in landscape orientation
9.8 feet (3m)
Remote control sensor out
Point the remote control toward the remote control sensor on the front of the monitor.
[PN-R706/PN-R606]
For the monitor in landscape orientation
[PN-R556/PN-R496/PN-R426]
For the monitor in landscape orientation
16.4 feet (5m)
TIPS
• Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.
• Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.
• The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.
• Objects between the remote control unit and the remote control sensor may prevent proper operation.
• Replace the batteries when they run low as this may shorten the remote control's operation range.
• If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.
• Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.
16
E
Remote control
sensor
20º
16.4 feet (5m)
16.4 feet
(5m)
30º
10º10º
Remote control
sensor
30º
For the monitor in portrait orientation
9.8 feet
(3m)
10º10º
For the monitor in portrait orientation
Remote control
sensor
For the monitor in portrait orientation
16.4 feet
(5m)
10º10º
10º
10º
9.8 feet
(3m)
Remote control
sensor
9.8 feet
(3m)
20º
10º 10º
16.4 feet
(5m)
10º
10º
10º
10º
16.4 feet
(5m)
Remote control sensor
10º
10º
16.4 feet
(5m)
Remote control
sensor
16.4 feet
(5m)
10º
10º