Connecting The Power Cord; Binding Cables - Sharp PN-R706 Operation Manual

Connecting the Power Cord

Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
The supplied cable clamps (affixing type) can be used to clamp the power code and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a flat surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.

Binding Cables

Cable clamp
(affixing type)
Affixing point
AC input terminal
Power cord (Supplied)
3
For power
outlet
Cable
Main power switch
1
2
13
E