Attaching The Terminals - Siemens SIRIUS 3SK1 Equipment Manual

Tools
• Screwdriver DIN 5264 of the size 0.5 x 3 mm
Procedure
1. Insert the screwdriver into the rectangular opening of the spring-loaded (push-in) terminal
until it engages.
2. Remove the cable from the oval opening.
3. Remove the screwdriver.
8.2.11

Attaching the terminals

Hazardous voltage
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Requirements
You must have removed the terminals, for the purpose of replacing a device, for example.
SIRIUS 3SK1 Safety Relays and 3RQ1 Positively-Driven Coupling Relays
Equipment Manual, 05/2021, A5E02526190021A/RS-AE/005
WARNING
Connection
8.2 22.5 mm/17.5 mm devices
163