Toshiba RAS-10PKVPG-NZ Service Manual page 115

No. Part name
Plasma-ion
7
charger, High
volt generator
Work procedure
1) Follow to the procedure in the item
2) Remove 3 screws and remove the ion-
charger assembly from the frame.
3) Remove the Plasma-ion charger from the High
volt generator assembly.
4) Remove cover of HV generator by unlock
4 claws.
5) Remove the board of HV generetor.
<Points to note during re-installation>
- Lay the wires straight, such that they pass
through the earth wire in a U-shape.
- Lay the wires such that the high voltage power
supply line passes in a U-shape.
5
- 115 -
FILE NO. SVM-18049
Remarks
3 Screws
Plasma-ion
4 Claws
U-shape groove
Ground lead