Table of Contents
Advertisement
Dugan Model E-2A User Guide
The six mix bus masters adjust the gains of the mixes, and the level meters show the
output levels. You can mute outputs and reverse their polarity.
NOTE:
Ctrl-click the mix bus masters fader to reset it to 0.
Touch and hold the gain slider to reset its value to 0.
iPad
Mix Bus Matrix
The signals available as inputs to the mix bus matrix include all Dugan-processed
channel outputs and all analog and ADAT inputs. To see all available processed and
unprocessed input signals to the mix bus matrix, scroll left or right.
To set the gain for a mix bus matrix crosspoint, enter values (-96 to 0 dB) in the desired
matrix cells.
•
To erase all previous routing, click the set to defaults button (at top-left).
This sets all crosspoints to -96 dB.
•
To set a crosspoint to unity gain, enter 0.
•
To attenuate a crosspoint, enter the desired dB value.
•
To remove a crosspoint, delete its contents.
Blank crosspoints are set to -96 dB (off).
Dugan Control Panel Software
50
Advertisement
Table of Contents
