Table of Contents
Advertisement
Dugan Model E-2A User Guide
Selecting Units to Display
After dividing units into separate systems, you may want to restrict the units shown
in the Top Pane to those in your studio. To do this:
1. Hover the mouse cursor over the names of the units that you want to display, and
note their IP addresses.
2. Ctrl-click on the + sign at the right of the Top Pane.
The + sign turns red.
3. Quit and relaunch the Dugan Control Panel.
It opens with Auto Detect Disabled in the Top Pane
4. Click on the red + sign, and enter the IP address of the first unit you want to add.
5. Repeat step 4 until your units all appear in the Top Pane.
Manually added units must also be removed manually. To remove manually added
units from the Top Pane, Shift-click on the
they have been removed.
To restore automatic detection, Ctrl-click on the
Dugan Control Panel Software
sign. A dialog appears to confirm that
+
sign, which turns white.
+
48
Advertisement
Table of Contents
