4. Remove two (2) screws (E) from ODD module (Figure 3-10).
5. Remove ODD bracket (D) from ODD module (Figure 3-10).
Figure 3-10. ODD bracket Removal
ODD Module Installation
1. Install the ODD bracket (D) to the ODD module. Refer to
2. Secure two (2) screws. Refer to
3. Install the ODD bezel to the module and press down to secure it. Refer to
4. Place the ODD module into the ODD bay. Refer to
5. Install and secure one (1) screw to the base cover.
6. Install the battery.
ID
A
M2.5*6.0
E
M2.0*3.0
3-14
E
Figure
Size
D
E
Figure
3-10.
Figure
Quantity
1
2
Machine Maintenance Procedures
3-10.
Figure
3-8.
Screw Type
0
3-9.